You are here: Home > Products > Sandstone Equipment > Heavy Hammer Crusher
Heavy Hammer Crusher

Heavy Hammer Crusher

Feeding Size: ≤600 - ≤1200 mm

Production Capacity: 100 - 800 t/h

Power: 132 - 560 kw

Total Weight: 16.2 - 63.6 t



Get a Quotation Send Message

Overview

Heavy Hammer Crusher Introduction

Heavy hammer crusher, also named as single stage hammer crusher manufacturer and hammer crusher machine, is applied to crushing various raw materials in  highways, high-speed railways, tunnels, large bridge, cement, metallurgy, building materials, coal, and chemical industry. The single stage hammer crusher manufacturer has large feeding size and small discharging size. The single hammer of hammer crusher machine has large weight, and the rotor speed is reasonable, which fully embodies the advantages of crushing light material with heavy hammer.

Heavy Hammer Crusher Features

Heavy hammer crusher is new type of crusher improved based on the PC series crushers, according to users’ feedback. Compared with traditional hammer crusher, the heavy hammer crusher enjoys heavy hammer head, high crushing line speed and other striking features, as well as large feeding size, large crushing ratio, low maintenance costs, etc.

Heavy Hammer Crusher Working Principle

Main working part of heavy hammer crusher is the rotor of hammer (also known as the hammer head), and the rotor is formed by spindle, disc, pin roll and a hammer, and the rotor is driven by motor to make high-speed revolution in crushing cavity. Materials are fed from the upper feeding port into the machine, and then be crushed by impact, shear, grinding and crushing of high-speed rotating hammer. Sieve is designed in the lower part of the rotor, so crushed item less than the size of mesh size will be discharged through the sieve board, while crushed item larger than the opening size will be left on the sieve plate for continues crushing and grinding by hammer, and finally be discharged through the sieve board.

Technical Datas of Heavy Hammer Crusher

Model Rotor diameter×length
(mm)
Feed opening
Length×width
(mm)
Feeding size
(mm)
Production capacity
(t/h)
Power
(kw)
Total weight
(t)
PCZ1310 1300×1000 1020×750 ≤600 100-180 132 16.2
PCZ1510 1500×1000 1530×850 ≤700 200-250 110×2 24.3
PCZ1515 1500×1500 1530×900 ≤750 260-350 132×2 30.1
PCZ1616 1600×1600 1640×1200 ≤1000 500-600 220×2 39.8
PCZ1818 1800×1800 1850×1400 ≤1200 650-800 280×2 63.6

Contact us

We will always serve customers by the service tenet of "to be responsible for every procedure".

Tel: +86-21-58386176 Email: [email protected]

Add: No.416 Jianye Road, South Jinqiao Area,Pudong New Area, Shanghai, China.   Site Map