You are here: Home > Products > Dryer Machine > Sand Dryer
Sand Dryer

Sand Dryer

Outer Cylinder Length: 6 - 8.5 m

Production Capacity: 20 - 99 t/h

Application Range: Slag industry and sand making industry.

Processible Materials: River sand, artificial sand, silica sand, yellow sand, mineral sand, mineral powder, grain slag, blast furnace slag, coal ash, coal cinder.



Get a Quotation Send Message

Overview

Sand Dryer Introduction

Sand dryer, also known as sand rotary dryer,sand drying machine or sand dryer machine, is a kind of drying equipment for drying large numbers of materials, with reliable running, operating flexibility, adaptability, large capacity, etc. Sand drying machine is suitable for drying granular materials, especially sand, river sand, quartz sand, with excellent drying effect.

The rotary sand dryer price of SBM is guaranteed minimum case of equal quality.

Sand Dryer Features

Sand dryer machine has advantages of large capacity, wide application range, small flow resistance, larger operation fluctuation range, ease operation and so on, so it’s often used for drying river sand, artificial sand, quartz sand, slag, cinders, etc.

Sand Dryer Working Principle

Sand will be fed into the hopper through belt conveyor and bucket elevator, and then be fed into the end hopper through feeding machine or pipes. The inclination of feeding pipe should be larger than natural inclination of materials, for sand smoothly entering into the dryer. Dryer drum is a slightly inclined rotating cylinder with horizontal lines. Materials are fed from the higher end, while heat medium enters from low-end, forming counter-current contact with materials. Heat medium flowing into the cylinder together with material is available. As the rotation of the cylinder, materials run to the end of the sand dryer under gravity. Wet material, in the course of the cylinder moving forward, directly or indirectly get heat from medium heat, for drying wet material, and then discharged through the spiral conveyor or belt conveyor installed at the end of discharging port. Sand dryer is equipped with lifting board on the cylinder wall, and the lifting board plays the role of lifting and falling down materials, increasing the contact surface between material and air flow, so as to improve the drying rate. Heat medium is generally divided into hot air, flue gas and others. Generally, heat medium after being dried needs to be cleaned the materials filled in gas by cyclone dust collector. If you need to further reduce exhaust dust content, pass through bag filter or wet dust collector before discharging it.

Technical Datas of Sand Dryer

Item φ2.0×6m φ2.5×6.5m φ2.7×7m φ3×7m φ3.2×7m φ3.6×8m φ4.2×8.5m
Diameter of outer cylinder (m) 2.0 2.5 2.7 3 3.2 3.6 4.2
Length of outer cylinder (m) 6 6.5 7 7 7 8 8.5
Cylinder volume () 18.84 31.89 40.5 49.46 56.26 81.38 118
Rotating speed of cylinder (rpm) 3-10 3-10 3-10 3-10 3-10 3-10 3-10
retention time of materials (min) 12-30 12-30 12-30 12-30 12-30 12-30 12-30
Initial moisture of materials (%) 6-25 6-25 6-25 6-25 6-25 6-25 6-25
Final moisture of materials (%) ≤1 ≤1 ≤1 ≤1 ≤1 ≤1 ≤1
Highest intake air temperature ( ℃ ) 750-900 ℃ 750-900 ℃ 750-900 ℃ 750-900 ℃ 750-900 ℃ 750-900 ℃ 750-900 ℃
Production capacity (T/H) Slag 20-25 25-30 30-35 35-10 40-45 50-65 70-85
Coal ash 10-17 17-21 20-25 23-27 25-30 30-45 45-63
Yellow sand 20-27 25-40 27-45 30-45 35-50 55-75 75-99
Motor type Yr160m-4 Yr132m-4E Yr160m-4 Yr160m-4 Yr132m-5E Yr160m-4E Yr160m-4E
Motor power (kw) 7.5×2 11×2 7.5×4 7.5×4 11×4 15×4 18.5×4
Reducer type XWD-6 XWD-6 XWD-6 XWD-6 XWD-6 XWD-8 XWD-8
Velocity ratio of reducer (I) 17-29 17-29 17-29 17-29 17-29 17-29 17-29

Contact us

We will always serve customers by the service tenet of "to be responsible for every procedure".

Tel: +86-21-58386176 Email: [email protected]

Add: No.416 Jianye Road, South Jinqiao Area,Pudong New Area, Shanghai, China.   Site Map