You are here: Home > Products > Sandstone Equipment > Tertiary Crusher
Tertiary Crusher

Tertiary Crusher

Feeding Size: <120 - <190 mm

Discharging Size: 5 - 10 mm

Power: 37 - 315 kw

Theoretical Weight: 3.9 - 49.7 t



Get a Quotation Send Message

Overview

Tertiary Crusher Introduction

The tertiary crusher is with wide applications range and advanced international technology, and it is the most effective and reliable crushing machine at present, widely applied to fine crushing and medium crushing of grinding materials, refractory materials, cement, silica sand and steel shot. Tertiary crusher is high efficient and energy saving crusher which can save 50% energy compared with the traditional fine crusher, so it’s the most advanced fine crushing equipment in the world.

Tertiary Crusher Features

Five designing features of the high efficient tertiary crusher or fine crusher: high line speed, abrasion resistance materials, machine structure, design of the grid plate and the influence of rigidity attrition crushing. All these features make the fine crusher able to effectively control the secular stability of discharging granularity. Tertiary crusher also has advantages of high crushing efficiency, low consumption, dust prevention, long service life of quick-wear parts, low cost of fittings, high running rate and simple maintenance.

Tertiary Crusher Working Principle

Advantages and features of the high efficient fine crusher: materials entering the cavity successively fall on the high speed spinning hammer and get crushed for the first time at the hammering zone under the action between the hammer and counter board. After high-frequency hammering and striking, materials fall on the median septum piling up and then they slide down on the bottom dumping disk of the high speed spinning rotor. Then materials are thrown to the impact plate at high speed and then are enforced to be impact, crushed and ground when passing the mobile board hammer.

Technical Datas of Tertiary Crusher

PXJ tertiary impact crusher Rotorø×Width
(mm)
Rotorø×Width
(mm)
Rotorø×Width
(mm)
Rotorø×Width
(mm)
Specification 800×400 800×600 800×800 1010×1010
Feed opening size(mm) 400×185 500×250 550×300 1000×350
Feeding size (mm) <120 <180 <180 <180
Discharging size (mm) 5-10 5-10 5-10 5-10
Adjustable range of discharge opening (mm) 5-50 5-50 5-50 5-50
Cement Clinker(t/h) 10-30 18-40 20-45 25-55
Limestone(t/h) 18-45 23-55 28-65 35-75
Power(kw) 37 37 45 55
Theoretical weight(t) 3.9 4.5 6 10.5

 

PXJ tertiary impact crusher Rotorø×Width
(mm)
Rotorø×Width
(mm)
Rotorø×Width
(mm)
Rotorø×Width
(mm)
Specification 1200
×1200
1400
×1400
1600
×1600
1800
×1800
Feed opening size(mm) 1200
×450
1500
×500
1600
×550
1800
×800
Feeding size (mm) <180 <190 <190 <190
Discharging size (mm) 5-10 5-10 5-10 5-10
Adjustable range of discharge opening (mm) 5-50 5-50 5-50 5-50
Cement Clinker(t/h) 50-110 50-150 85-210 125-270
Limestone(t/h) 45-100 50-150 95-260 140-310
Power(kw) 110 160 250 315
Theoretical weight(t) 14.4 22 35 49.7

Contact us

We will always serve customers by the service tenet of "to be responsible for every procedure".

Tel: +86-21-58386176 Email: [email protected]

Add: No.416 Jianye Road, South Jinqiao Area,Pudong New Area, Shanghai, China.   Site Map