SBM dry powder briquette machine or quicklime dry powder briquetting machine can bear high pressure and can manage high strength work, mainly used to make balls and realize agglomeration from ferrous and non-ferrous metal powder. The mineral powder directly enters the smelting furnace with increasing additional value. All metallurgy wastes with auxiliary materials to smelt including fly ash, sludge, oxide skin, slag, iron fine powder, aluminum ash and manganese mineral powder need this machine to process.
SBM dry powder briquette machinee is applied to press dry powder materials which are hard to form balls. Its features are forming hardness, adjustable mainframe revolution and auxiliary spiral feeding machine.
1. The hydraulic pressure protecting device adopts its pump to press the high pressure oil into the cylinder and makes the piston moves with axial displacement.
2. The front connecting end of the piston rod supports the shaft block to meet production requirement. When too many materials or metal blocks enter the space between the two compression rollers, the piston rod of the hydraulic cylinder gets so pressed that the pump will stop working and the energy accumulator will make buffer action facing pressure change.
3. Then the flood valve starts the oil return and the piston rod replacement will widen the space between the rollers thus forcing hard materials to pass the rollers. Finally, the whole system pressure returns to normal condition so that the rollers won’t be damaged.
4. The quicklime dry powder briquetting machine can be made flexibly by adjusting its pressure.
Technical Datas of Dry Powder Briquette Machine
|Diamter of press roll
|Width diameter of roll surface
|Main reducer||Preformer reducer||Rotating speed||Hydraulic motor