You are here: Home > Products > Pellet Machine > Flat Die Pellet Mill
Flat Die Pellet Mill

Flat Die Pellet Mill

Fodder Yield: 75 - 1100 kg/h

Output of Sawdust: 40 - 800 kg/h

Net Weight/Gross Weight: 120 - 580 kg



Get a Quotation Send Message

Overview

Flat Die Pellet Mill Introduction

Flat die pellet mill or flat die pellet machine uses two-stage driving of belt and worm and gear, with smooth running, low noise, gravity feeding, no blocking, spindle speeds of roughly 60rpm, and line speeds of roller roughly 2.5m/s, so flat die pellet machine can effectively remove the gas and increase the tightness of product. The lower line speeds can reduce noise and wear in runtime, so the flat die pellet mill can produce products with high fat and high molasses. In addition, the roller bearing has lasting lubrication and special seal, which can prevent lubricant contaminated and reduce the loss of lubricant in the pelleting process.

Flat Die Pellet Mill Features

1. The finished products of the flat die wood pellet machine made by SBM Machinery-one of China famous flat die pellet mill suppliers is dried without drying (The moisture of raw material is not less than 13% of the national export standards). SBM flat die pellet mill is equipped with differential mechanism, Cardan drive, electrical machine or diesel engine, with low power, high output, and easy to operate.
2. SBM flat die pellet mill uses new technology of extrusion-granulation, polishing and finishing, which thoroughly solves the traditional granulation process problems of low organic ingredients (around 30%), difficult to pellet, raw materials required to be dried, and other critical technical problems.
3. SBM flat die pellet mill machine can produce ball type organic fertilizer, organic and inorganic fertilizer and bio-organic fertilizer, with smooth and rounded grain, high strength, good fluidity, etc.
4. SBM flat die pellet mill machine uses unique three-in-one technology to complete the process of low temperature drying, cooling and screening in one time, with low equipment investment and low running cost. Microbial survival rate can be up to 90% or above it.

Flat Die Pellet Mill Working Principle

When the flat die pellet mill works, the compression roller and stamper make relative motion to compress and compact materials into die holes, and then be cut into grain or block through floccitation. Flat die pellet mill is divided into two transmission forms: 1. The mill frame is fixed on the enclosure, the spindle drives the stamper to rotate; 2. The compression moulding is fixed, the spindle drives pressure roller to work, while the pressure roller does both revolution and rotation. The two driving models of flat die wood pellet machine have the same principle.

Technical Datas of Flat Die Pellet Mill

Model Matching power Fodder yield
(kg/h)
Output of sawdust
(kg/h)
Net weight/gross weight
(kg)
Packing measurement
(mm)
ZLSP120A Equipped with 8 horse-power diesel engine 75-100 40-80 120/140 900*440*730
ZLSP120B Three-phase 3kw One-phase 2.2kw 75-100 40-80 210 670*390*910
ZLSP150A Equipped with 6.5 horse-power diesel engine 100-150 50-90 180/220 870*440*700
ZLSP150A Equipped with 8 horse-power diesel engine 100-150 50-90 180/220 870*440*700
ZLSP200A Three-phase 4kw 90-120 50-90 95/110 700*350*650
ZLSP200B Equipped with 15 horse-power diesel engine 250-350 80-120 210/240 900*430*950
ZLSP200B Three-phase 7.5kw motor 200-300 80-120 200/230 1000*460*900
ZLSP200C Three-phase 7.5kw motor 200-300 80-120 200/230 1000*460*900
ZLSP230A Equipped with 22 horse-power diesel engine 300-400 150-300 280/310 1180*560*1020
ZLSP230B Three-phase 11kw motor 300-400 150-300 290/320 1140*470*970
ZLSP230C Three-phase11kw motor 300-400 150-300 290/320 1140*470*970
ZLSP260A Equipped with 30 horse-power diesel engine 400-600 200-450 330/360 1200*500*1070
ZLSP260B Three-phase 15kw motor 400-600 200-450 320/360 1120*490*1070
ZLSP260C Three-phase 15kw motor 400-600 200-450 320/360 1120*490*1070
ZLSP300A Equipped with 55 horse-power diesel engine 600-800 300-600 410/450 1220*600*1000
ZLSP300B Three-phase 22kw motor 600-800 300-600 480 1170*520*1070
ZLSP300C Three-phase 22kw motor 600-800 300-600 480 1170*520*1070
ZLSP360A Equipped with 55 horse-power diesel engine 700-900 500-700 470/500 1220*600*1000
ZLSP360B Three-phase 22kw motor 700-900 500-700 500 1270*520*1070
ZLSP360C Three-phase 22kw motor 700-900 500-700 500 1270*520*1070
ZLSP400A Equipped with 55 horse-power diesel engine 900-1100 400-800 550/585 1320*600*1050
ZLSP400B Three-phase 30kw motor 900-1100 400-800 580 1470*600*1150
ZLSP400C Three-phase 30kw motor 900-1100 400-800 580 1470*600*1150

Related Products

Contact us

We will always serve customers by the service tenet of "to be responsible for every procedure".

Tel: +86-21-58386176 Email: [email protected]

Add: No.416 Jianye Road, South Jinqiao Area,Pudong New Area, Shanghai, China.   Site Map